Products

Products

Spray & Fogger Systems

7L-Electric-ULV-Fogger

What is disinfectant fogging?

Disinfectant fogging involves covering a whole room with a microbial substance that can purify and remove pathogens from air, as well as from surfaces within the room with particle sizes of 0-50μm/Mm (micro-meters/microns). Disinfectant fogging is highly effective at combating pathogens,particularly those that are airborne or carried in respiratory droplets, such as the flu virus or covid-19 coronavirus.

Surface Coating Protection vs. Disinfection

“We just happen to do both”

  1. Envirocleanse-A
  2. Surface Guard 90 coating

In Healthcare environments, it is important to understand the fundamental differences between surface protection and disinfection. In addition, the use of SURFACE GUARD 90 is not meant to replace current protocols. Instead, the use of SURFACE GUARD 90 will greatly enhance traditional cleaning methods. With most disinfectants, a ten-minute dwell time on a surface will render most microbes inactive. Unfortunately, disinfectants fall into the category of non-bound technologies. In other words, they off-gas poisons to be effective against microbes. (“BTW Our disinfectant does not use poisons or gases”)By doing this they in effect “give themselves up” and on total evaporation leave little if any residual benefits…dry surface = zero kill. Here is where SURFACE GUARD 90, surface protectant excels. Through the process of splicing Silane and Organo molecules, this combination yields a very efficacious surface treatment. This splicing allows the best properties of a disinfectant to continue working on the surface for up to ninety days. In effect, any surface treated with SURFACE GUARD 90 will have long-term protection. Since the Mode of Action is microbiostatic in nature, it is equally effective on all surfaces. This includes both porous and non-porous surfaces. This is another benefit since most disinfectants are only approved for hard, non-porous surfaces.

Germ Busters 3 step system

Step 1: We hand wipe high touch areas with microfiber towels

(we offer two opinions for step two ask for more details)

Step 2-A: We disinfect and sanitize all surfaces requested and recommended with our powerful EPA registered disinfectant using commercial grade foggers and sprayers.

Step 2-B: We sanitize and disinfect using some of our innovative high power ultraviolet lighting lamps. UVC lamps are a technology being used in hospitals around the country and in New York on subway trains and many other areas in need of destroying pathogens.

Step 3: In my opinion this final step is just as important as the first two if not more important. After step 1 and 2 have been completed and you now have clean surface areas and touch points, We then apply an EPA registered Antimicrobial coating on all cleaned and disinfected areas which will bond and leave a shield of protection that can help fight off and kill microbes for up to 30 to 90 days depending on traffic.

“LET WORK TOGETHER TO HELP KEEP OUR BUSINESS,EMPLOYEES AND CUSTOMERS SAFE!”

SurfaceGuard 90

Sprayers and Foggers

Antimicrobial Coating What is SurfaceGuard? SurfaceGuard is a surface protectant that inhibits odor causing bacteria, ...

Envirocleanse

Sprayers and Foggers

What is Envirocleanse-A? Envirocleanse-A is a broad-spectrum, liquid disinfectant that is organic, biodegradable and safe ...